AD 94-01-03 R2
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Teledyne Continental Motors | Magnetos | Airworthiness Directives; Teledyne Continental Motors (formerly Bendix) S-20, S-200, S-600, and S-1200 Series Magnetos |
Unsafe Condition
Failure of Bendix ignition coils and rotating magnets could result in magneto failure and subsequent engine failure.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Replace Bendix ignition coils and rotating magnets with improved Teledyne Continental Motors (TCM) parts or replacement serviceable PMA parts. Install Slick magnetos as an alternative. Mark magnetos to indicate compliance. Perform requirements on magnetos with replaced Bendix data plates.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Accomplish actions in accordance with TCM Mandatory Service Bulletin MSB644.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Teledyne Continental Motors (formerly Bendix) S-20, S-200, S-600, and S-1200 series magnetos with specific data plates and serial numbers as listed in the AD.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.